Is a replacement windscreen as good as the original?
The quality of the glass itself in a replacement windscreen will meet the same OEM (Original Equipment Manufacturer) specifications if it is produced by the same company that manufactured the original windscreen.
Contrary to common belief, many vehicle manufacturers do not produce their own automotive glass. Instead, they outsource production to major automotive glass manufacturers such as Fuyao, Saint-Gobain Sekurit, Asahi Glass Co. (AGC Inc.) and Xinyi Glass (XYG).
OEM windscreens are manufactured by these companies, stamped with the vehicle manufacturer's logo and then supplied to the vehicle manufacturer, where a mark-up is added to the price.
OEE (Original Equipment Equivalent) windscreens are manufactured by the same company that produced the original windscreen but carry the glass manufacturer's logo rather than the vehicle manufacturer's branding. OEE windscreens are considerably cheaper because they are sold wholesale without the additional vehicle manufacturer mark-up.
OEE windscreens are classified as aftermarket products. However, the main distinction in quality between OEE glass and other aftermarket windscreens is whether or not the replacement is manufactured by the same company that produced the original.
Provided the replacement windscreen is also professionally installed using the correct processes and procedures, it can maintain the same quality and safety standards as the original windscreen.
OEM Quality Windscreens
-
Most windscreen replacements are aftermarket products because they are cheaper, and most insurance companies will only cover the cost of an aftermarket windscreen replacement. There are high-quality aftermarket windscreens available that have the same specifications as a genuine OEM windscreen, and there are others that do not. You need to know the difference.
-
Fuyao has an exclusive wholesale distributor in New Zealand, which supplies automotive glass to most auto glass repair shops. XYG (Xinyi Glass) is Fuyao's main competitor in the New Zealand automotive glass market, although it does not have an exclusive distributor agreement. Both are major global brands whose products are used and trusted by automakers such as BMW, Mercedes-Benz, Audi, Volkswagen, Porsche, Volvo, Land Rover, Fiat, Bentley, General Motors, Ford, Chrysler, Toyota, Nissan, Mazda, Subaru, Mitsubishi, Hyundai, Kia and Tesla to manufacture OEM glass.
-
Other brands available on the New Zealand market include DXG (Guangzhou Dongxu), ZDG (Heshan Zhengda) and Guangzhou Tengfa, which produce aftermarket replacement automotive glass. These aftermarket brands are generally cheaper and usable, but their products typically have some differences in features and specifications compared with the original vehicle windscreen.



Correct windscreen replacement installation
-
Windscreen replacement is more complicated than people often believe. Most DIYers use silicone to install their windscreens, which is unsatisfactory and potentially unsafe. As a result, the vehicle's windscreen could detach in the event of an accident, cause the vehicle's roof to collapse in a rollover, prevent the airbags from operating effectively and, of course, allow water to leak into the vehicle.
-
There are different types of polymer adhesives. Silicone is a polymer; however, only polyurethane (PU) and MS polymer sealants (modified silane/silane-modified polymer) can meet factory crashworthiness standards and be WOF/COF compliant in New Zealand.
-
Properly preparing the windscreen is an important part of the installation process. Fingerprints, sticker residue, dust, dirt and moisture can contaminate the bonding surface of the windscreen and affect the integrity of the bond between the windscreen and the vehicle. The surface must be properly decontaminated before installation using industry-approved bonding agents.
-
Applying windscreen adhesive to the vehicle aperture must be done correctly to achieve the bonding strength of the original installation and meet WOF/COF standards. The windscreen adhesive must be applied to the same surface area as in the previous installation.
-
For example, if the polyurethane bead is applied unevenly and moves away from the original bead track on the vehicle's pinch weld, it may bond to the windscreen's rubber moulding rather than the glass itself. Applying adhesive directly over paint without using the appropriate primer to promote adhesion may result in a weak bond.
-
Accurate windscreen placement is essential, particularly in modern vehicles equipped with ADAS camera systems. Even being a few millimetres out of position can affect the operation of the ADAS system and may require recalibration. Installing the windscreen too far to one side or too low can also cause water leaks, create whistling noises while driving and compromise the integrity of the bond between the windscreen and the vehicle.
Phone 0800 24 2000 for expert advice or free quotes for cracked windscreen repair or replacement.




